Knurl Wheels

Convex Forming Knurls - Inch

Convex Forming Knurls - Metric

Form Type Knurls - Inch

Form Type Knurls - Metric

Cut Type Knurls - Metric

Conical Knurling Wheels

Shank Conical Knurl Wheels

Bevel Face Knurling

Other Products

"W2" Series Inch Form Type Knurls

W2 SERIES
1/2 x 1/4 x 1/4"
(12.70 x 6.3 x 6.3mm)                         

"FORM TYPE KNURLS"


  • Available in Hi-Cobalt with Super Smooth Lapped Tooth Profile
  • Tin Coating Surface Treatment is Standard as Stock
  • 90° Tooth Form (some with 70° Tooth Form) with Beveled Edges     
  • The Diametral Pitch Wheels have an 80° Tooth Profile
 PH Series

Quantity Discounts

Circular Pitch - W2 -  SERIES - Hi-Cobalt Steel
Included Tooth Angle
Circular Pitch
AA Straight
BL 30° LH Diagonal
BR 30° RH Diagonal
90º
16 TPI / 1.59mm
90º
20 TPI / 1.27mm
90º
25 TPI / 1.02mm
90º
30 TPI / 0.85mm
90°
35 TPI / 0.73mm
90°
 40 TPI / 0.64mm
70°
 50 TPI / 0.51mm
70°
 80 TPI / 0.32mm
Hi-Cobalt Steel
 List Price
$36.00

Quantity Discounts

Diametral Pitch - W2 -  SERIES - Hi-Cobalt Steel
Included Tooth Angle
 Pitch
AA Straight
BL 30° LH Diagonal
BR 30° RH Diagonal
80º
064 DP
80°
096 DP
80°
128 DP
 W2SX128 W2LX128 W2RX128
80°
160 DP
 W2SX160 W2LX160 W2RX160
Hi-Cobalt Steel
List Price
 $46.00

If you do not see what you are looking for - please call.

Quantity Discount Information for General Customers

Total # Knurls or Pins
Discount off List Price
6 - 9
10 %
10 - 19
13 %
20 - 49
16 %
50 -99
20 %
100 - 299
24 %


Note: Knurl pins and "KT" (conical) series urls are not combinable with standard urls for discount purposes.


*** Pricing and Discount structure are subject to change without notice.


W2 SERIES BUMP HOLDER SERIES

                                                                                                                                                         

                                                                                                  

W2  SINGLE DIE BUMP HOLDER                           W2 TWO DIE BUMP HOLDER


W2 SINGLE DIE BUMP HOLDER (INCH SERIES)

                   TOOL#                     
KNURL
SERIES
PINS
   WASHER    
HOLDER DIMENSIONS (in)
PRICE
        A         
      B       
C
D
E
F
            OR UTSPW2             
0.500
0.625
4.535 
3.75 
 0.875 
0.188
$ 260
0.625
0.625
 4.535  
  3.75  
0.875
0.188
 $ 260


W2 TWO DIE BUMP HOLDER (INCH SERIES)

                   TOOL#                     
KNURL
SERIES
PINS
   WASHER    
HOLDER DIMENSIONS (in)
PRICE
        A         
      B       
C
D
E
F
            OR UTSPW2             
0.500
0.625
4.535 
3.75 
 1.150 
0.188
$ 345
0.625
0.625
 4.535  
  3.75  
1.150
0.188
 $ 345


If you do not see what you are looking for - please call.


Accu Trak Knurling Tools are manufactured to extremely high standards from premium alloys. Many are available with a lapped tooth form to give longer life and impart a smooth, clean surface to the knurled part. Both sides and the bore of the knurl are finish ground to maintain close tolerance on diameter and side runout. Our standard material is a high quality grade of High Speed steel which is vacuum hardened, and tempered at least 2 times to a hardness of about 63 Rockwell C.

For severe knurling operations, such as rolling on 303 stainless or semi-hardened steels, Accu Trak also offers knurls in a premium grade of high-cobalt steel. These knurling tools are slightly harder and in most applications deliver a substantial increase in tool life. Multiple coatings such as "TiN" and "Ferritic Nitrocarburizing" are also available if necessary. Our sales representatives will be happy to discuss any aspect of your knurling application and make recommendations on maximizing tool life versus cost for any type of knurling operation.

In addition to the many stock knurling dies shown above, we can manufacture virtually any size and pitch special knurling tools with 1-2 week normal delivery for standard knurl tooth forms.